Comparison Artline Overlord X56 X56v10 vs Vinga FireStrike Gryphon M92XAC74T0VN

The capacity of the optional storage installed in the PC.

This parameter is relevant primarily for configurations with different types of media. So, in HDD + SSD and HDD + eMMC bundles, the hard drive is considered the main drive, and this paragraph indicates the capacity of the solid-state module. In SSD + eMMC configurations, eMMC is considered the second drive — less capacious and performing an auxiliary function. There are PC models with two hard drives, but in such cases, the drives usually have the same volume, and it does not matter for them which one is considered the main one.

If we talk about specific numbers, then the volume up to 128 GB can be considered relatively small, and 128 GB or more is solid. For more information on volumes in general, see "Drive Capacity" above.

In most desktop PCs, this assortment is determined both by connectors on the "motherboard" and on a discrete graphics card, among which VGA, DVI, HDMI output(there are models where HDMI 2 pcs), HDMI input, DisplayPort, miniDisplayPort. More details about them.

— VGA. He's D-Sub. Analogue video output with maximum resolution up to 1280x1024 and no audio support. It is rarely installed in modern devices, but it can be useful for connecting certain models of projectors and TVs, as well as outdated video equipment.

— DVI. Modern PCs can be equipped with both pure digital DVI-D and hybrid DVI-I; the latter also allows analogue connection, including work with VGA-devices through an adapter, and in analogue format has a resolution of 1280x1024. In digital DVI, this parameter can reach 1920x1200 in single-link mode (single link) and 2560x1600 in dual-link mode. The presence of a dual-channel mode must be specified separately.

— HDMI output. Digital output originally designed for HD content — high-definition video and multi-channel audio. The HDMI interface is almost mandatory for modern HD multimedia technology, and it is also extremely popular in computer monitors — so the presence of such an output on a PC provides ve...ry extensive features for connecting external screens and even high-end audio devices. Some devices may even have 2 HDMI outputs.

— HDMI input. Your PC has at least one HDMI input. See above for details on the interface itself; here we note that it is the inputs of this format that are found mainly in monoblocks (see "Type"). At a minimum, this allows you to use the monoblock's own display as a screen for another device (for example, as an external monitor for a laptop). However, there are other, more specific options for using the HDMI input — for example, recording an incoming video signal, or transferring (switching) it to one of the PC video outputs.
Both the HDMI inputs and outputs in modern PCs may correspond to different versions:

• v 1.4. The earliest standard widely used today. Supports resolutions up to 4096x2160 and frame rates up to 120 fps (however, only at a resolution of 1920x1080 or lower), and can also be used to transmit 3D video. In addition to the original version 1.4, you can find improved v 1.4a and v 1.4b — in both cases, the improvements affected mainly the work with 3D.
• v2.0. The standard, also known as HDMI UHD, was the first to introduce full support for UltraHD 4K, with frame rates up to 60 fps, as well as compatibility with a 21:9 aspect ratio. In addition, the number of simultaneously transmitted channels and audio streams has increased to 32 and 4, respectively. It is also worth noting that initially version 2.0 did not provide support for HDR, but it appeared in update v 2.0a; if this feature is important to you, it's ok to clarify which version 2.0 is provided in the PC, the original or the updated one.
• v2.0b. The second update of the above v 2.0. The main update was the expansion of HDR capabilities, in particular, support for two new formats.
• v2.1. It is also HDMI Ultra High Speed: the bandwidth has been increased to such an extent that it became possible to transfer 10K video at 120 fps (not to mention more modest resolutions) as well as work with extended colour schemes up to 16 bits. The latter may come in handy for some professional tasks. However, note that all the features of HDMI v 2.1 are available only when using cables designed for this standard.

— Display port. A digital media interface similar in many respects to HDMI, but mainly used in computer technology — in particular, it is widely used in Apple computers and monitors. One of the interesting features of this standard is the ability to work in the daisy chain format — connecting several screens to one port in series, transmitting its own signal to each of them (although this function is not technically available with all screens for this interface). DisplayPort is also on the market in several versions, the current ones are as follows:

• v 1.2. The earliest widely used version (2010). However, already in this version, 3D compatibility and the daisy chain mode appeared. The maximum fully supported resolution when connecting a single monitor is 5K (30 fps), transmission up to 8K is possible with certain restrictions; a frame rate of 60 Hz is supported up to a resolution of 3840x2160, and 120 Hz — up to 2560x1600. And when using daisy chain, you can connect up to 2 2560x1600 screens at 60 frames per second or up to 4 1920x1200 screens at the same time. In addition to the original version 1.2, there is an improved v 1.2a, the main innovation of which is support for AMD FreeSync, a technology for synchronizing the monitor's frame rate with the signal from an AMD graphics card.
• v 1.3. An update introduced in 2014. The increased bandwidth made it possible to provide full, without restrictions, support for 8K at 30 fps, as well as transmit 4K images at 120 fps, sufficient for 3D work. Resolutions in daisy chain mode have also increased — up to 4K (3840x2160) at 60 fps for two screens and 2560x1600 at the same frame rate for four. Of the specific innovations, it is worth mentioning the Dual Mode mode, which allows you to connect HDMI and DVI devices to such a connector through the simplest passive adapters.
• v 1.4. The newest version widely used in modern PCs. Formally, the maximum connection speed has not increased compared to the previous version, but thanks to signal optimization, it became possible to work with 4K and 5K resolutions at 240 fps and with 8K at 120 fps. However for this, the connected screen must support DSC encoding technology — otherwise, the available resolutions will not differ from version 1.3. In addition, v 1.4 added support for a number of special features, including HDR10, and the maximum number of simultaneously transmitted audio channels increased to 32.

— miniDisplayPort. A smaller version of the DisplayPort connector described above, may also correspond to different versions (see above). Note that the same hardware connector is used in the Thunderbolt interface versions 1 and 2, and the graphic part of this interface is based on DisplayPort. Therefore, even some Thunderbolt monitors can be directly connected to miniDisplayPort (although it is desirable to clarify this possibility separately).

— COM port (RS-232). Serial port, originally used to connect dial-up modems and some peripherals, in particular, mice. However, today this interface is used as a service interface in various devices — TVs, projectors, network equipment (routers and switches), etc. Connecting to a PC via RS-232 allows you to control the operation parameters of an external device from a computer.

The presence of a mini-Jack connector (3.5 mm) on the front panel of the PC. More precisely, in ordinary desktop PCs, gaming systems and monoblocks (see "Type") there are most often two such connectors: one plays the role of an output for headphones, speakers, etc., the second plays the role of a microphone input. But in compact devices like some mini-Jack nettops, there can be only one — a universal port, in which you can turn on both headphones / speakers and a headset with one common plug for a microphone and “ears”.

Anyway, such connectors are closer to the user and are more convenient to connect than similar sound card outputs on the rear panel of the case.

The number of full size USB 2.0 connectors provided on the front of the PC.

USB is the most popular modern interface for connecting peripherals. And the number of connectors is, accordingly, the number of devices that can be simultaneously connected to the front panel without the use of splitters. Specifically, version 2.0 was the most popular some time ago, but now it is considered obsolete, it is gradually being replaced by more advanced standards like USB 3.0 (3.1 gen1). However, USB 2.0 capabilities (data transfer rates up to 480 Mbps) are still sufficient for many peripheral devices, from keyboards and mice to printers. So this standard is still far from completely disappearing, and some PCs may have several of these ports on the front panel at once.

Separately, it is worth noting that similar connectors are most often available on the back of the case. However, the front panel is closer to the user, and the sockets on it are optimal for peripherals that need to be connected and disconnected frequently, such as flash drives.

The number of full-size USB 3.2 gen1 connectors(previously labeled USB 3.1 gen1 and USB 3.0) provided on the front panel of the PC.

USB is the most popular modern interface for connecting peripherals. And the number of connectors is, accordingly, the number of devices that can be simultaneously connected to the front panel without the use of splitters. As for version 3.2 gen1, it has speeds up to 4.8 Gbps). USB 3.2 gen1 connectors are also compatible with USB 2.0 peripherals. Thus, 2 or more such connectors are often provided on the front panel at once.

Separately, it is worth noting that similar ports are most often available on the back of the case. However, the front panel is closer to the user, the connectors on it are optimally suited for peripherals that need to be connected and disconnected frequently, such as flash drives.

The model of the audio chip (a module for processing and outputting sound) installed in the computer. Data on the exact name of the sound chip will be useful when looking for detailed information about it.

Modern PCs can be equipped with fairly advanced audio modules, with support for high-quality sound and extensive features. Thanks to this, some configurations can even be used for recording and other professional audio work. However, if you are planning such an application, it would not hurt to clarify the specific capabilities of the audio chip separately: it may well be that even an advanced workstation will still need an external audio card.

The power of the power supply installed in the PC.

Theoretically, if you buy a ready-to-use computer, the power of the block installed in it is guaranteed to be enough for the normal operation of the system. However, even in such cases, it's ok to pay attention to this parameter: other things being equal, a more powerful PSU provides an additional margin in case of high loads and emergency situations. And if the system is bought understaffed (for example, without RAM or a drive), or it is planned to be upgraded (especially with the installation of “gluttonous” components like a discrete graphics card), you should definitely clarify whether the PSU has enough capabilities for this. The power of the power supply should definitely not be lower than the power consumption of the system, and ideally it should exceed it by at least 100 – 150 W — again, in case of unforeseen situations.

Also, this parameter must be taken into account in some situations when catering — for example, when calculating the total load when connecting a computer to an uninterrupted power supply (UPS).