Comparison Imprese Nova Vlna 05135 vs Imprese Centrum 10400

Types of application provided by the design of the tap.

Modern taps can be designed for bath, shower, washbasin, bidet, kitchen, drinking water filter only and with the possibility of connecting to a filter. At the same time, many models are designed for several application formats at the same time — for example, functioning with a bathtub and a washbasin at the same time; and there are models without mixing water at all (with one connection pipe) — only for cold or only for already mixed water. More details in the separate paragraphs below.

— For bathtub. Taps used to fill the bathtub. Traditionally provided for wall mounting (see "Installation"), although there are exceptions in some specific models. In addition to a bathtub, such a tap can be used for a shower and/or a washbasin; in the first case, the design provides for the connection of a shower set, in the second, a long swivel spout that can be turned from the bathroom to the sink of the nearby washbasin.

— For shower. This option means that a shower set can be connected to the tap; sometimes such units are even supplied as a set (see "Spout design"). Specialized shower taps are exclusively wall-mounted or built-in (see "Install...ation"). At the same time, in addition to “shower-only” models, there are also “multi-purpose” products designed to be used simultaneously with a bathtub, and sometimes also with a washbasin (see “For bathtub” above).

— For washbasin. Specialized taps designed only for washbasins and have a relatively short spout, usually fixed, and can be installed in almost any way (except that floor models are a rather exotic option that has not gained distribution). Due to the similarity of washbasins with kitchen sinks, some models of a similar design can also be used as kitchen taps. Another, quite common, option is a hygienic shower for use with a bidet. Also note that the “washbasin” assignment can also be provided as an additional function in taps originally designed for bathtubs (see above).

— For kitchen. Taps for this purpose can be both highly specialized and provide other applications — for a washbasin (see above) or for a drinking water filter (see below). Anyway, such products are mounted mainly on a wall or tabletop, and the spout can be made quite high so that a pan or other large dish can be placed under. Also, in kitchen taps an interesting feature as a spring spout can be found (see "Spout design").

— For bidet. A bidet is a device in the form of a hygienic bath for washing the external genitalia and anus after going to the toilet. The classic bidet tap is installed directly on such a bath in a horizontal way (see "Installation"); the shape and design of the spout in such models is selected in such a way as to ensure effective ablution. However, in addition to this, the “bidet” category also includes specialized taps for a hygienic shower — a similar procedure carried out using a separate shower set. Such taps are built into the wall and do not require a separate bidet — a hygienic shower can also be used with a conventional toilet.

— For drinking water filter. Taps designed to supply drinking water from a tap filter, usually located under the kitchen sink. They are installed exclusively on the tabletop (see "Installation"), most often on the sink itself. Specialized models with only this equipment are distinguished by their small size and single-valve design (see "Tap type"). In addition, the possibility of connecting a drinking water filter can be provided as an additional feature in kitchen taps (see above). In such models, the spout has two holes — for "common kitchen" and for drinking water; each flow is controlled separately by its own valve (set of valves) or by a joystick.

— No water mixing. Taps that are designed to supply water at the still temperature. Outwardly, such models are no different from the classic ones: some are made with levers, others with a cross handle. But the key to them is the presence of only one pipe for supplying water. Accordingly, you can connect only cold, only hot or already mixed water.

The tap type is indicated by the type of controls installed in it. A number of features of both management and application in general depend on this. Nowadays, on the market you can find single cross handle, two cross handle, single lever (including those with additional touch control), non-contact and thermostatic taps, as well as push button models, which include both self-closing and thermostatic with a button. Here are the main features of these options:

— Single handle. Taps controlled by a single rotary handle (or a lever that moves in only one plane). In fact, they are not even "taps" as such, since they cannot mix hot and cold water and only regulate the pressure of the water supplied to them. It makes sense to use single handle models where the water temperature is constant and/or it makes no sense to regulate it — for example, in models for a kitchen filter (see "Suitable for"), for a washbasin where only cold water is used, or for an English-style washbasin, where hot and cold water is supplied from separate taps and mixed in the sink.

— Double handle. The classic design of taps, which does not lose popularity nowadays: two rotary handles responsible for...hot and cold water, respectively. This design is simple and inexpensive, while being reliable, moreover, it is convenient for precise temperature control. In addition, two handle taps are not afraid of the difference in the pressure of hot and cold water, and therefore it is recommended to use them with boilers. The disadvantage of this option is the impossibility of changing the pressure separately from the temperature and vice versa — any change requires turning both valves, while the pressure and temperature can fluctuate.

— Single lever. Taps where the flow of water is controlled by a single lever. Most often, turning the joystick from side to side in such models regulates the temperature, and tilting relative to the axis of rotation controls the pressure. This allows you to adjust the temperature without changing the pressure (and vice versa) and even “remember” the selected temperature option (just lower the lever to close without turning it sideways). At the same time, such devices are less accurate in adjustment than double cross handle ones.
Occasionally, you can also find a more specific variety — single-lever taps, supplemented by a separate temperature control lever (see below). In such models, the main joystick controls only the pressure.

— Push button. Models of mixers in which the control of turning the water supply on and off is assigned to a button. The first press turns on the water flow, the second turns it off. The button can be either an auxiliary means for conveniently turning on/off the water, or the main control element for the tap. In the latter option, to adjust the water supply pressure, the button is often made rotary.

— Self-closing. A variety of taps with button activation. However, here the button works on the principle of a timer: when you press it, water flows, and then a special mechanism gradually returns the button back, blocking the flow. Closing time is selected in such a way that one press allows you to more or less effectively wash your hands. Such devices are especially popular in public places, such as toilets of cafés, shopping centres, cinemas, etc.: there is no need to worry that an inattentive visitor will forget to turn off the tap. Most often, these taps are single-temperature, but there are also models with a temperature adjustment lever (see below).

— Thermostatic. Taps that have a thermostat function — that is, capable of automatically maintaining the temperature set by the user. Such models are extremely convenient: when the pressure or temperature of the water in the pipes fluctuates, you do not need to fiddle with the settings — the device will independently select the operating mode so that the outlet temperature does not change (or at least these changes are minimal). The main disadvantage of thermostatic models is the complexity of the design and, as a result, the high cost. In addition, many of them require an electrical connection. For control, models may include rotary controls or a button (see above).

— Non-contact. Models operated in a non-contact way — without the need to touch the device. This format of operation is most popular in washbasin taps (see "Suitable for"): in such models, a sensor is used that reacts to the presence of the user's hands under the spout. This is especially convenient in common areas where it is undesirable to touch the tap once again. There are other types of non-contact models — in particular, devices for the kitchen or shower. In the first case, it can be inconvenient to open an ordinary tap with dirty hands after kitchen work. At the same time, the control may not be completely contactless — there are devices with valves or other equipment for pre-setting the temperature, while the sensor in them works only as a water flow switch. And touchless shower taps necessarily have an additional control for setting the temperature; the sensor in them reacts not just to the hands, but to the whole person.

— Single-lever + touch. A variety of single-lever mixers (see above), equipped with an additional switch. As in conventional single-lever models, the joystick in such devices is used to adjust the pressure and temperature; the difference lies in the fact that the water is opened not by a lever, but by the mentioned switch. In other words, it is enough to set the optimal pressure and temperature once using the joystick — and then you can turn on the water by simply touching the switch. The device of the switch itself can be different: in some models, the entire tap's body plays its role, in others a special button or even a foot pedal is provided. The exception is the non-contact models described above — they may be similar in design and method of use, but all the same, these taps are classified into a separate category.

— Straight. Spout that have straight or almost straight shape and directed almost horizontally (other arrangements are highlighted in a separate paragraph — see “At right angle”). Generally, such a spout combines simplicity, practicality, and versatility. In particular, it can be of any length, and can also be rotary (see “Spout”), while being inexpensive to manufacture. Nowadays, straight spouts are extremely popular, and in almost all types of taps (see “Suitable for”). The exception is perhaps the kitchen application: this form is inconvenient for washing dishes by itself and leaves less space for dishes in the sink than other shapes (for example, angled or gooseneck spouts).

— Gooseneck. Taps with a spout in the shape of an arc, usually semicircular and rather steep. This design is most popular in kitchen taps, as it provides the necessary space for washing large dishes. Many models with such a spout are designed for washbasins — they also use a vertical installation, for which the arc is very convenient. And gooseneck bath taps are most often original premium models installed directly on the side of the bath (also horizontally).

— L-shaped. Spout in the shape of the letter “L” — with a vertical base and a horizontal “crossbar” extending from it. Thanks to this shape, the spout can be positioned at a sufficiently high height, which is especially conveni...ent when used in the kitchen or with a washbasin. Most of the L-shaped models refer to these specialization options (see “Suitable for”). According to the type of the tap (see the corresponding list), they are usually single-lever, while the joystick is located on the side; however, there are other options — both in the location of the joystick, and in the type of control.

— U-shaped. Spouts of this category resemble L-shaped models (see the relevant paragraph), in which the end of the spout is noticeably bent downwards. This gives them an original shape, as well as some resemblance to gooseneck models. U-shaped spouts are typically taller and are intended for use in kitchens or washbasins. At the same time, they are not as popular as the mentioned L-shaped ones, and even more so the gooseneck ones. In particular, because of the higher cost with no obvious practical advantages (although this form may well be optimal in terms of design).

— S-shaped. A variant that is predominantly found in bath models (including bath and washbasin solutions) as well as in some kitchen taps. The spout in this arrangement has the shape of the letter “S”, laid “on its side”. This design is well suited for wall-mounted models, where the spout outlet must be placed noticeably below the tap itself.

— At right angle. A straight spout located at a right angle relative to the tap body — directed from the base of the body up or down. This shape is especially suitable for washbasins and kitchens, and it is mainly found in taps of those specializations (see “Suitable for”). Most models with a similar spout have a fairly modern appearance, thanks to that they fit well into modern, high-tech interiors, etc.

— Curved at an angle. A spout that leans upward from the base of the tap and curves slightly downward at the end. The shape is in many ways reminiscent of the “at right angle” option, but it has its own characteristics. Firstly, such a spout can be made somewhat longer, which is convenient for kitchen use: the outlet is at a sufficiently high height and there is enough space under it to wash even large dishes without any problems. Most of the models in this category are just made for the kitchen. Secondly, for some users, this form is preferable from an aesthetic point of view (although, of course, this is a matter of personal taste). These spouts look more “cheap” compared to the products of the “at right angle” form factor and are extremely rare among top plumbing brands.

— Vertical jet. This type of spout is found among bidet taps. It involves vertical spraying of a water jet for taking a hygienic shower after visiting the toilet. The mortise vertical spray module is installed separately from the tap. Usually, the design also assumes a water return valve.

— Connected to overflow. Taps with a spout in the form of a flexible hose that connects to the overflow of the bathtub, and the water is poured through it. Thanks to such taps, minimalism is ensured in the appearance of the bathtub, which is caused by the absence of a classic spout. In addition, there is no need to make extra holes in the side of the bathtub to install the tap.

Distance from the fixing point (for vertically mounted taps) or from the centre of the mounting hole (for horizontally mounted taps) to the middle of the spout. It is a characteristic that determines the "reach zone" of the tap.

The jet height is usually specified for taps with horizontal installation (see "Type of installation"). It is measured from the base of the tap to the spout outlet. The large height of the spout is important primarily for kitchen models (see "Suitable for"), because it allows you to place large dishes in the sink. This parameter is directly related to the height of the spout (see above): the height of the jet cannot be greater than the height of the spout. Thus, in fact, one has to find a compromise between the height of the jet and the dimensions of the tap, especially if there is little space for its installation.

The functions of the tap are mainly design features, among which the are check valve, bottom valve, cold start, LED backlight, temperature adjustment lever, display, auto-drain (hygienic flush), washer/dishwasher switch< /a>, shelves for accessories. In more detail:

— Check valve. The non-return valve prevents the flow of water through the tap in the opposite direction — for example, when there is a large pressure difference between hot and cold water. This function will be relevant for those who are going to install water metres: the presence of check valves on mixers is often a prerequisite for fulfilling an application for installation, because such valves prevent counters from spinning in the opposite direction. In addition, you should pay attention to the presence of a check valve in the tap (especially a single-lever tap, see "Tap type"), if there are interruptions in the water supply of your house — such taps behave much better in case of pressure surges in the water supply.

— Drain valve. A device that allows you to close the drain hole in the sink, kitchen sink or bidet (depending on the purpose of the tap). There are two types:

— Lever drain valve....To control the operation of such a valve, a small lever is used, located behind the tap, on the side of it or in front of the body. Raising and lowering it opens and closes the drain plug in the sink.

— Pressing drain valve. Valves of this type are locked and unlocked by pressing the drain plug, for which you need to wet your hand.

— Cold start. A feature found exclusively in single-lever models. The general principle of operation of the “cold start” is as follows: if you open the tap with the initial position of the joystick, it will not bring out mixed warm water (as in more traditional single-lever devices), but only cold water. To add hot water and raise the temperature, you need to deflect the lever from its initial position. Such a format of work can provide significant savings: by default, cold water comes out of the tap, and hot water is added to it only if necessary.

— LED light. Lighting system based on LEDs — an efficient and economical source of illumination. The purpose and functionality of such a backlight may be different. So, in some models, it is installed on the spout and directed downwards, which allows you to clearly see the space under the spout even in low ambient light. Sometimes such illumination also illuminates the stream of water, giving it an unusual appearance. There are also quite original systems — for example, with a transparent spout and LEDs at its base, which creates the effect of a tap glowing from the inside; and in some models, the lighting also changes color depending on the temperature of the water. However, anyway, this feature significantly affects the cost, so it is typical mainly for premium products.

— Autodrain (hygienic flush). Such a system is equipped with taps with additional electronics — mostly contactless models, as well as products with a thermostat or a button switch. The autodrain works as follows: at a certain rate (for example, once every 12 hours or once a day), the automation briefly turns on the water. Due to this, harmful bacteria are washed out of the device, which tend to multiply on the inner surfaces of the spout and in “stagnant” water inside the tap itself. At the same time, the consumption of water for hygienic washing is small, usually it is practically not noticeable against the background of general consumption.

— Temperature adjustment lever. A function found in taps, which design initially does not imply a temperature controller — primarily non-contact models, as well as in products with one main lever or with button activation (see "Tap type"). As the name implies, the temperature control lever allows you to use such a tap not only to control the pressure, but also to change the temperature of the water.

– Display. Taps that display temperature and/or current water flow. The display provides a clear visualization of the settings and allows you to see what kind of water and how much is flowing from the tap. However, the presence of the screen significantly affects the cost of the tap.

— Washer/dishwasher switch. A function that can significantly facilitate the connection of a washing machine or dishwasher to the water supply system. Taps with a washer/dishwasher switch have a separate pipe for connecting the dishwasher, as well as the switch itself, which allows you to open and close the water supply to this pipe. Thus, to connect a washing machine or dishwasher, you do not need to install additional bushings, splitters, etc. — just connect the device to an existing output. And you can control the water supply directly from the tap body, for this you do not need to get under the sink or into another hard-to-reach place.

— Shelf for accessories. Most often, the role of such a shelf is played by the upper part of the body, specially made flat. This feature is found mainly in bath and/or shower taps (see “Suitable for”): it is convenient to keep shampoos, gels, soaps and other cosmetic/hygiene products on the shelf.

Note that this function is rare — mainly in high-end taps (in particular, thermostatic ones), which initially have large body sizes. In more traditional models, it makes no sense to include this design element — it is wiser to purchase a shelf as a separate accessory for the bathroom.

Material and design features of the valve (valves) responsible for opening and closing water in the tap.

— Rubber. Valve material for low-cost one- and two-valve mixers (see “Product type”). Rubber is inexpensive, easy to replace, and resistant to contaminated water (unlike ceramics). On the other hand, rubber valves have a relatively short service life — when they wear out, they begin to leak, and they have to be changed time to time.

— Ceramic. These valves are based on a pair of ceramic-metal plates polished for maximum contact and tightness. They can be used both in cross-handle and lever taps (see "Product type"). This material is much more durable than rubber, and in the case of a single-lever tap, it also makes adjustment easier, because the friction between the plates is low, and it is much easier to move the lever than with a ball valve. The disadvantage of ceramics is the sensitivity to water contamination by solid particles — getting between the plates, they can break the tightness of the valve. Therefore, it is recommended to install filters in front of such taps.

— Electromagnetic. A type of valve used in all non-contact mixers (see "Product type"), as well as some models of a different design — in particular, push-button and single-lever with touch. As the name implies, an electromagnet is responsible for opening and closing water i...n such models. At the same time, the valve in most models has only two positions — “open” and “closed” — and does not imply pressure adjustment. But the temperature controller can be provided — for example, in the form of an appropriate lever (see above). Electromagnetic valves are quite efficient, but expensive and require external power to operate.

— Ball valve. A type of valve originally developed for single-lever taps (from which the tendency to call such devices "ball valves" came from, which is not technically correct). At the heart of such a valve is a spherical element with a special slot through which water is supplied; when the lever moves, the slot occupies one position or another, on which the pressure and temperature of the water depend. In domestic taps, this type of valve is considered obsolete and is rarely used.

The maximum water flow during the operation of the tap, in other words, the maximum amount of water that it can pass through in a minute. This characteristic is important, foremost, for models designed for baths (see "Suitable for"): the greater the throughput, the faster the bath will fill. However, the meaning of this paragraph is not limited to this. First, flow information can be useful in certain calculations related to water supply — for example, to calculate the required pump capacity. Secondly, high-end taps can be equipped with aerators to achieve a powerful and efficient jet with low water consumption; the consumption indicated in the characteristics allows you to evaluate the efficiency of such devices in comparison with analogues.

A diverter is a device that switches a water flow between spout and shower head. The design of such a device and the way it is controlled can be different, in modern taps you can mainly find the following options:

— Button. Diverters of this type have the form of a button; but its design depends on the characteristics of a particular tap. In relatively simple mechanical models (most of them), the button is also made mechanical, and to switch from spout to shower, you need to pull it up. And switching in the opposite direction — from a shower to a spout — can often be carried out not only manually, but also automatically, when the water is turned off (see "Features — Shower / bath auto switch"). In some taps, auto-switching can also be blocked by the user (usually by turning the button in the up position).
In turn, in advanced electronic devices, such a diverter is made in the form of an electric button that closes the contacts that control the valve.

— Lever. Diverter in the form of a rotary lever. Most often, this lever directly controls the valve that switches the flow of water. This design is considered somewhat less reliable than push-button, but it is much simpler and cheaper, which makes it very popular — especially in relatively inexpensive taps. But in premium devices, this type of diverter can operate according to other, more advanced principles — for example, a lever can work as an electronic switch.

— Turning the spout. A r...ather rare and specific option: the role of the lever that controls the flow of water is performed directly by the spout, to the base of which a shower hose is connected. Such a control, usually, works as follows: while the spout is perpendicular to the tap body, water flows through it, and to switch to the shower, the spout turns, being under the tap. Such devices look interesting, and are convenient to use. On the other hand, they are quite complex and expensive, and the spout itself, for a number of reasons, is typically made quite short. Therefore, this variant has not gained popularity.

— Removable. A diverter located outside the body — usually between the tap itself and the spout. Typically, on one side of such a device there is a control element (most often a small lever or a rotary tap), and on the other, a pipe for connecting a shower hose. And the name "removable" suggests that this part can be easily removed if needed — unlike, for example, push-button or lever solutions, which are usually built directly into the tap body and are very difficult to dismantle or replace. Accordingly, after removal, the diverter can either be replaced with another one, or removed altogether by connecting the spout directly to the tap. This is the main advantage of this option: in case of malfunctions in the diverter, it can be removed without any problems for repair or replacement, while the tap (with the exception of the “shower part”) remains fully operational.