General type of memory card.
—
SD (Secure Digital). One of the most popular types of memory cards nowadays. They have a size of 32x44 mm and mechanical write protection — in the form of a slider. Support for SD cards is practically the standard for modern laptops and digital cameras, and such media are also very common in other devices (except for the most compact ones, where a smaller version is used —
microSD ; it is described below). At the same time, we note that today this type includes three varieties:
- Original SD standard. It supports up to 4 GB and relatively low speeds, which is why it is considered obsolete and rarely used. On the other hand, such cards can be used in almost all modern SD-card readers.
- SDHC. An evolution of the original SD standard. The maximum capacity has been increased to 32 GB, and support for high-speed UHS bus (see "UHS Class") is possible, although this support is not required. SD HC cards can be used in card readers of this format, as well as in devices for newer SDXC.
- SDXC. The newest SD card standard in common use today. Allows you to create media up to 2 TB; in addition, it was in this standard that the UHS bus was first introduced (after which it began to be used also in SDHC cards). In addition to card readers for this format, such media can also work with devices for SDHC — however, only if the card is formatted in the FAT32 file system, whil...e by default SDXC uses the exFAT system.
— microSD. A smaller version of the SD cards described above; the size of such a card is 15x11 mm. They are also very popular, but primarily in pocket technology — smartphones, tablets, portable players, etc. Like the full-size version, they have three varieties:
- original microSD;
- microSDHC;
- microSDXC;
Application features are also similar: older cards can be used in newer card readers, but usually not vice versa.
— miniSD, miniSDHC. One of the smaller varieties of SD cards that preceded microSD (HC). Nowadays, it is considered completely obsolete and has practically fallen into disuse.
—
CompactFlash. One of the first memory card formats on the market. Includes two formats — CompactFlash Type I and CompactFlash Type II. They differ in read / write speed and size — Type II is faster and has a thickness of 5 mm (Type I — 3.3 mm with the same length and width of 42x36 mm). Due to this, a Type I card can be used with a Type II reader, but not vice versa. Despite its venerable age, this format is still popular in photographic equipment due to decent speeds and volumes (up to 128 GB); The main disadvantage is the large size compared to other formats.
—
CFast 2.0. High-performance drives for fast handling of large amounts of data. CFast 2.0 standard cards are the size of Compact Flash flash drives (42 x 36 mm), at the same time they have even more impressive read and write speeds (over 500 Mbps). Drives of this class excel when recording high-bitrate video in resolutions up to 8K, as well as in the genre of reportage photography with high-speed burst shooting in RAW. The amount of memory for CFast 2.0 flash drives can exceed 1 TB. Compatibility with memory cards of this standard is implemented in individual copies of top-end cameras and camcorders.
xD-Picture. A standard developed by Olympus and Fujifilm and used primarily in their digital cameras. The main feature of these cards is the lack of a memory controller — thanks to this they are reliable, compact (20x25 mm) and have low power consumption. On the other hand, the volume of such cards is low (up to 2 GB), the reading speed is also quite low, and they cost several times more than similar microSD media (including HC and XC). As a result, even the creators themselves are gradually shifting the focus towards other types of cards.
— memorystick. A proprietary standard developed by Sony specifically for its equipment back in 1998. It is closed, almost never used in devices from other manufacturers. It was widely used until the early 2010s, when Sony began to gradually move to the common SD standard. Nowadays, Memory Stick support is extremely rare, mainly in outdated devices.
Let's note that in this case cards of both the original form factor (50x21x2.8 mm) and Duo cards with reduced dimensions (31x20x1.6 mm) can be meant. The third size, micro, is placed in a separate paragraph (see below). However, all these form factors are compatible through the simplest adapters.
— Memory stick micro. The smallest version of the Memory Stick standard. For more information about this standard, see above, but here we note that Memory Stick micro (also known as M2) have dimensions of 15x12.5x1.2 mm.
— XQD. The successors of CompactFlash cards, developed by the CompactFlash Association specifically for devices that require high read and write speeds, in particular cameras and camcorders — the practical write speed reaches 125 Mb / s, and there is evidence that this is not the limit. At the same time, this card appeared relatively recently and is only gaining popularity. It has rather large dimensions — 39x30x4 mm, larger than SD, although it is somewhat inferior to CompactFlash.
— cfexpress. Incredibly fast high-capacity drives with an eye for long continuous recording in intensive mode. They are the best suited for shooting video in 4K resolution and higher with a frame rate of 120 fps. Advanced instances of the series provide write and read speeds of over 1 Gbps. Also, the cards of the line have resistance to damage during falls and high bending strength. There are two types of CFexpress drives: Type A with dimensions of 20x28x2.8 mm and Type B with dimensions of 38.5x29.8x3.8 mm.
— SxS. Memory card format jointly developed by Sony and SanDisk for professional video applications. It uses the PCI Express interface, which makes it possible to install such cards directly into the expansion card slot on a computer and laptop. It also has a high data transfer rate — up to 2.5 Gbps at the peak.
— PS Vita Card. A specialized memory card format designed, as the name suggests, for PlayStation Vita handheld game consoles. Created by Sony to replace UMD discs, not used by other manufacturers. It is proprietary, incompatible with universal standards like SD. Cards are available in capacities from 4GB to 64GB.
— Nano memory. A type of memory card introduced in 2018 by Huawei and mainly used in Huawei smartphones. Also known colloquially as nano SD, although this designation is technically incorrect. The size (area) of such a carrier is 45% smaller than that of popular microSD cards, while Nano Memory cards are identical in size and pin arrangement to nanoSIM SIM cards. This simplifies the use of combined slots in smartphones (suitable for both a SIM card and a memory card). As for the characteristics, initially for Nano Memory volumes up to 256 GB and read speeds up to 90 MB / s were announced; if this standard proves successful, these numbers can be expected to increase.
The nominal capacity of a memory card is the amount of data that can be written to it. For technical reasons, the real working volume of modern memory cards is usually somewhat less than the nominal one (for example, 14.9 GB with the claimed 16 GB). However, with the same type of card, differences in nominal capacity usually correspond to differences in actual capacity: for example, a 64 GB SDXC card will actually have twice the capacity of a 32 GB card of the same card.
Recall that different types of media have different limits on the maximum volume; see "Type" for details. And a specific volume is most often chosen by the manufacturer not arbitrarily, but from a list of standard options. The most widely used cards nowadays are
16 GB,
32 GB,
64 GB,
128 GB and
256 GB ; capacities of
8 GB or less are considered modest, with the most capacious models holding
512 GB or more.
Note that the price of the card directly depends on this parameter. Thus, many models are available in several variations, differing solely in capacity; and it is worth choosing by volume depending on the types of data that are planned to be stored on the card. Of the popular formats, text documents occupy the least space — usually tens, at most hundreds of kilo
...bytes. The size of a photo from a modern camera or an MP3 file is already calculated in megabytes, music in lossless formats "weighs" already tens of megabytes, and the volume of a video depends on its duration, resolution and the codecs used.Speed class when working with applications to which the memory card corresponds.
When working with applications that use a memory card (for example, mobile games), information is written and read not in a continuous stream, as when recording video or copying data, but in separate small fragments, and from random areas in the drive’s memory (the so-called random write/read). So a high-class video recording (see above) does not always mean good flow Rate when working with demanding games and other resource-intensive programs. Therefore, the characteristics of memory cards began to separately indicate the speed class for applications.
The key indicator for assigning a particular class is the minimum number of IOPS (input/output operations per second) that the media can provide in random write and read mode. Nowadays, the following classes are relevant:
—
A1 — at least 1500 IOPS for reading and 500 IOPS for writing;
—
A2 — at least 4000 IOPS and 2000 IOPS, respectively.
The continuous recording speed (for example, when recording video) in both cases must be at least 10 MB/s (often it is higher - see “Speed class”, “Video recording class”).
In the future, we can expect the emergence of new, more productive classes for applications. We also note that this parameter significantly affects the price of the card.
The maximum speed of reading data from a memory card.
Any modern memory card provides sufficient reading speed for simple everyday tasks — like copying photos from a camera to a laptop. Therefore, it makes sense to pay attention to this parameter mainly in cases where the card is purchased for professional use, or if high speed is critical for you — for example, if you often have to copy photos from the camera in a hurry. In doing so, two points should be taken into account. Firstly, the corresponding speed must be supported by the card reader where the card is used. Secondly, this paragraph indicates the theoretical maximum — in perfect conditions; the actual reading speed may be lower (if we are talking about cards with UHS, this speed can be estimated by the UHS class, see above about it). Nevertheless, it is quite possible to compare different models of cards by this indicator: differences in theoretical speed usually quite correspond to the difference in actual speed.
The ability to switch the card to read-only mode, which allows you to protect important data from accidental overwriting or erasure. Usually implemented in the form of a mechanical slider switch, the position of which determines the card's operating mode. However, it is worth considering that this slider is only an indicator that signals the card reader about the selected mode, and its position does not affect the card itself; in some card readers,
the write protection function may simply be absent - such devices will not "see" the position of the slider.
An additional
adapter is included with the memory card.
The adapter is a device with which the card can be installed in a non-native format card reader. Nowadays, microSD cards are mainly equipped with such a device — adapters are designed to install such media in a slot for a full-size SD card. This is convenient primarily for exchanging data between portable gadgets like a smartphone / tablet and larger equipment like PCs and laptops — for example, to copy pictures from a smartphone camera to a computer or music from a computer to a smartphone.
