Comparison Garmin BC 50 vs Garmin BC 40

Standard installation method and location provided for by the camera design.

- Universal. This installation method can be conventionally called “external” - the camera is placed on a stand that is screwed to a particular surface, and the body is completely located outside. This option is generally universal and can be used regardless of the car brand, although there are standard cameras (see below) with this installation.

- Mortise. Cameras installed in specially made sockets for them. They are usually round in shape, and for installation it is enough to drill a hole of the appropriate size in the car body. Also, as a rule, they are universal.

— Screw. Cameras designed to be installed using a screw mount (hence the name). They are quite simple and easy to install - just make a hole for a screw in the body, and the required hole size is noticeably smaller than that of mortise models. Most often they are universal.

— License plate frame. Devices that are frames for license plates with built-in rear view cameras. They are convenient because they do not require special installation work - the structure is simply installed instead of the standard frame, on the same fastenings. At the same time, it is worth considering that frames for numbers can have different formats and, accordingly, the size and c...onfiguration of fasteners; This point must be clarified before purchasing.

— In the license plate light. Cameras mounted in the license plate light. They often include not only a camera, but also a lamp to illuminate the license plates. License plate lamps on different cars have different designs; accordingly, models of this type are made mostly standard (see below).

- In the trunk handle. Models that consist of a trunk handle with a camera installed in it and are mounted instead of the complete handle. They are made only by regular ones (see below).

- In the emblem. Models of this type can represent either separate cameras built into the “nameplate” or emblems supplemented with cameras and installed instead of the factory emblem. By definition, they are only regular (see below).

— In the radiator grille. In the vast majority of cars, the engine and, accordingly, the radiator are located at the front; Accordingly, this option is typical for forward-looking cameras (see “View type”). Most of these models are standard (see below).

- At the stop sign. The optics are made in the form of a brake light. As a rule, such cameras are made for a specific make and model of car. The device itself is installed in place of one of the standard brake light headlights (right, left or center). At the same time, during the installation process there is no need to make holes in the body elements or turn off the license plate light. The camera in the brake light body does not violate the integrity of the design of the stern, laconically blending into the image of the exterior.

Although modern electronics are dominated by digital standards, car reversing cameras still use an analogue signal transmission format. This is due to compatibility requirements: such video allows you to use fairly simple screens. And although its quality loses to digital, it is quite enough for most of the tasks facing this class of auto electronics.

An analogue video signal has a size in horizontal and vertical dots. But since the number of vertical dots has a strictly defined number of 625 (in the PAL and NTSC colour system), resolution is usually indicated only by the number of horizontal dots (TV lines).

In fact, this parameter describes the quality of the image that is displayed directly on the screen connected to the camera. There are models with a value of 480, 500, 520, 540, 560 TVL and even higher resolution in TVL. This is important for models with wide viewing angles (see below). On the other hand, in order to use all the features of a camera with numerous TV lines, a screen corresponding to these features is also required; For more details on compatibility with the screen, see specialized sources.

- Auto exposure. The presence in the camera of the function of automatically adjusting the shooting parameters to the degree of illumination of the scene caught in the frame. Exposure in the classical sense is the amount of light perceived by the photosensitive element of the camera; it can be changed by opening and closing the aperture of the lens, as well as by adjusting the shutter speed of each frame. If the range of these adjustments is not enough, a change in the sensitivity of the matrix can also be used in digital devices. Either way, an underexposed image will look too dark, and an overexposed image will look too bright; both are unsuitable for viewing. However, the process of manually adjusting all the parameters is rather troublesome and obviously inappropriate when driving in a car, especially since the illumination of the picture in the field of view of the lens can change in a matter of seconds. Therefore, most modern cameras have an auto exposure function. Thanks to it, the device itself sets the parameters to the optimal level and changes them when the illumination changes. Note that such automation is not ideal, but in the vast majority of cases it is quite enough for normal visibility on the screen.

- Auto white balance. The camera has an automatic white balance correction function. Despite the name, this balance concerns not only white color, but also the overall color gamut of...the image coming from the camera. Without going into details, its meaning can be described as follows: each type of lighting (sunlight, overcast day, fluorescent lamps in the garage, street lights, etc.) needs its own white balance settings, otherwise the colors in the image will look unnatural - too warm or too cold. Auto-correction, on the other hand, relieves the user of the need to adjust the white balance manually - the device itself determines the type of lighting and reconfigures. At the same time, given the specifics of the purpose of the rear and front view cameras, this function is rather a pleasant addition than a practically significant point - after all, it is not the colors of visible objects that are usually decisive when maneuvering, but their location in space.

— Parking labels. Possibility of displaying by the camera on the connected screen of parking marks — a special scale which is superimposed on the visible image in a special way. Such a scale plays the role of a rangefinder: the distance to the object visible on the screen can be estimated by the mark near which it is located, this greatly simplifies maneuvering in tight conditions. In addition, in some models, it also helps to evaluate the dimensions of the visible openings in width. True, for an adequate display of parking marks, the camera must be installed quite accurately - at the optimal height from the ground and at a certain angle to the horizontal; in regular models (see "Installation type"), this usually does not cause difficulties, but universal models may require ingenuity and painstaking work. We also note that even with an ideal installation, the accuracy of the parking marks will be far from absolute. However, they can be a very useful addition to a "clean" camera image.

- DVR function. The ability to shoot not only in the mode of broadcasting an image to a multimedia screen, but also to record the situation around the car on an external data drive. The DVR function is implemented in advanced models with a separate data processing unit, the design of which provides a slot for a memory card for storing captured video materials.

- Top view. The top view gives you full control over the situation around the car and makes it easier to maneuver in tight spaces. Also, the top view allows you to better see obstacles in blind spots and improves the safety of reversing parking in tight spaces. This feature is found in surround view systems. The projection of the top view is formed by processing images from cameras dispersed around the perimeter of the vehicle.

- Water protection. The presence in the design of the chamber of protection against moisture ingress. This feature is almost mandatory for outdoor models, as they will inevitably be exposed to rain, snow, spray from wheels, etc. In some cases, the manufacturer even indicates the level of this protection. However, even without it, you can be sure that nothing will happen to the camera even in the rain.

- Remote control. A remote control is included with the camera. Unlike conventional household devices, wired remote controls are most often used in automotive electronics; reversing cameras are no exception. This is due to the fact that the wire in the car is often not only cheaper, but also more convenient than an IR sensor or a radio channel. We also note that this function is usually found in premium models that have additional features - for example, switching the viewing angle.